Laser Material Information

Back to Laser Machining Center

Index

  1. Dropping-Off Your Material
  2. Specifying Material
  3. Materials That Can Be Machined in the Laser Cutter
    1. BEAM Dynamics Material Table (Cut Settings)
    2. BEAM Dynamics Etch Settings
    3. BEAM Dynamics Fill Settings
    4. BEAM Dynamics Score Settings
    5. Epilog Material Table (Cut Settings)
    6. Epilog Etch Settings
    7. Epilog Fill (Raster) Settings
    8. View Material Samples Online
  4. List of Prohibited Materials
  5. The Difference Between Acrylics and Polycarbonates
  6. Testing New Materials
  7. Specifying Orientation
  8. Additional Preparation
    1. Tabbing
    2. Multiple Cuts / Flip Cuts
    3. Kerf Width and Slot Fitting
    4. Material Masking
    5. Cleaning Materials

Laser Material Information

Dropping-Off Your Material

All materials for laser cutting are to be dropped off in the laser area of the Rapid Prototyping Center prior to submitting your job through the DAAPspace online submission system. Always make sure that material orientation ("0,0,0 Here", "X-Axis This Way", or "This Side Up") and your full name are written somewhere on your material, or attached to your material with a Post-It reinforced with Scotch tape (so we don't lose it). Large, flat-stock material is to be placed in the vertical storage unit (the blue, steel-tube dividers) adjacent to the BEAM Dynamics machine. Smaller materials should be placed on the intake drawer of the large worktable behind the BEAM Dynamics machine.

Specifying Material

When you are filling out the DAAPspace Job Submission web page, be sure to include material (be specific!), and the material dimensions (length x width x thickness) in the Material Description box. This information will be compared to your physical material prior to approving the job.


Materials That Can Be Machined in the Laser Cutter

Most of the materials that have been successfully tested in the laser cutter are on display within the Rapid Lab. They are toward the back of the lab near the laser cutter on a board titled RPCenter Laser samples. The Rapid Lab cannot guarantee the same quality of cut for all materials. Based upon their chemical composition, some materials may cut nicely while others may burn, smoke, and discolor their way through the cut. The Rapid Lab reserves the right to deny any material deemed unsuitable for the laser cutter.



BEAM Dynamics Material Table (Cut Settings)

The materials in the table below have been tested and deemed suitable for the BEAM Dynamics laser cutter.
Material Type Maximum Material Thickness (in)
ABS 0.1250
Acrylic 0.5000
Canvas 0.0300
Carbon_Fiber 0.0625
Carbon_Nanotubes 0.0165
Cardboard 0.0500
Cardboard - Corrugated 0.3750
Chipboard 0.1410_3PLY
Corian 0.5000
Cork 0.3000
Denim 0.0350
Duroid 0.0300
Gravoply 0.0625
Illustration Board 0.1000
Leather 0.2000
Masonite 0.1950
MDF 0.5000
MDO 0.5000
Museum Board 0.0625
Neoprene 0.1500
Paper 0.0100
PETG 0.3000
Plastic_Corrugated Board 0.1600
Plywood 0.6250
Plywood_Birch 0.4600
Plywood_Birch Veneer 0.0156
Rowmark 0.0625
Rubber 0.1250
Soundboard 0.5000
Styrene 0.1520
Suede 0.0500
Taskboard 0.0910
Wood_Basswood 0.4375
Wood_Cherry 0.5000
Wood_Pine 0.6250
Wood_Rosewood 0.1250
Wood_Veneer 0.0800
Wood_Veneer 0.0910_2PLY
Wood_Walnut 0.8750
Wood_Walnut Veneer 0.0250
Wool_Felt 0.1875

List of Prohibited Materials :(

  • low-grade plywood (material bows excessively and contains cavities)
  • sheet metal (material is too strong to cut)
  • aluminum (material is too strong to cut and reflects laser)
  • copper (material is too strong to cut and reflects laser)
  • brass (material is too strong to cut and reflects laser)
  • glass (material is too strong to cut and reflects laser)
  • mirror (material is too strong to cut and reflects laser)
  • polycarbonate (burns badly, releases poison vapor)
  • vinyl (burns badly, releases poison vapor)
  • PVC (burns badly, releases poison vapor)
  • foamcore (fire hazard)
  • SNC-3 neoprene (excessive particulate damages optics)
  • low density polyethylene foam (excess melting of material)
  • self-laminated or glued materials (fire hazard)
  • wood knots or varying density (laser will fail to cut)
  • warped materials (laser head will crash)
  • materials of varying thickness (laser head will crash)


The Difference Between Acrylics :) and Polycarbonates :(

One of the most confusing issues with material selection is how to tell the difference between acrylics, which laser cut well, and polycarbonates, which are prohibited in the laser cutter. The simplest way to tell is by identifying the brand name.

Common Acrylic Brands :)

  • Acrylite, Altuglas, Chemcast, Lucite, Optix, Perspex, Plexiglas, Repsol, Setacryl

Common Polycarbonate Brands :(

  • Barlo, Calibre, Hyzod, Lexan, Markrolon, Palsun, Sustanat, Tecanat, Tristar



BEAM Dynamics Etch Settings

Etching is when the laser marks the material without piercing through and is used toward a variety of purposes. All etching and filling is done at 600in/min unless otherwise requested. Though etch settings can be customized, the RPC has created the following standard etch settings:
Etch Setting Power (%)
0 (very fine) 5
1 (fine) 7
2 (medium fine) 8
3 (medium) 10
4 (medium heavy) 12
5 (heavy) 15

Etching depth and line clarity varies from material to material. Please visit the RPC to see etched material samples.


BEAM Dynamics Fill Settings

Filling is a dense series of horizontal lines defined by a closed boundary that etch a field onto a material. All etching and filling is done at 600in/min unless otherwise requested. Though fill settings can be customized, the RPC has created the following standard etch settings:
Fill Setting Density (in) Offset (in) Power (%) Focus (in)
Standard 0.005 - 0.010 0.002 - 0.005 5 - 15 -0.20 - 0.00
Rowmark 0.003 0.002 10 -0.15
Woodblock* 0.006 0.003 60 -0.05
*for relief printing




Etching depth and line clarity varies from material to material. Please visit the RPC to see filled material samples.


BEAM Dynamics Score Settings

Scoring is an etch deep enough to assist in the folding of a material. All etching and filling is done at 600in/min unless otherwise requested. The RPC hopes to develop a table of score settings specific to the materials we typically cut.
Score Setting Power (%)
Chipboard_0.0625" 15
under construction... more settings coming soon...

Epilog Material Table (Cut Settings)

The materials in the table below have been tested and deemed suitable for the Epilog laser cutter. The feeds indicated are percentage of maximum speed, so a lower percentage equals a more expensive cut and vice versa. All etching is done at 100% speed unless otherwise requested.
Material Type Maximum Material Thickness (in)
Acrylic 0.1250
Cardboard 0.1610
Chipboard - single ply only 0.0625
Chipboard - single ply only 0.1400
Crescent_Board 0.1000
Leather 0.1250
Masonite 0.1250
Museum_Board 0.0625
Paper 0.0010
Plastic_Board 0.1875
Plywood_Birch_Veneer 0.015
Rowmark 0.0250
Wood_Basswood 0.1875


Epilog Etch Settings

All etching is done at 100% speed unless otherwise requested. Though etch settings can be customized, the RPC has created the following standard etch settings:
Etch Setting Power (%)
0 (very fine) 3
1 (fine) 5
2 (medium fine) 10
3 (medium) 15
4 (medium heavy) 20
5 (heavy) 25


Epilog Fill (Raster) Settings

Filling in the Epilog is called raster machining and uses the same motion found in inkjet printing. Though fill settings can be customized, the RPC has created the following standard fill settings:
Fill Setting DPI Cutting Speed (%) Power (%)
0_Fill_0 600 100 5
0_Fill_1 600 100 10
0_Fill_2 600 100 20
0_Fill_3 600 100 30
0_Fill_4 600 100 40
0_Fill_5 600 100 50
Acrylic 600 100 20
Masonite 600 100 50
Woodblock* 1200 70 100
*for relief printing




View Material Samples Online


Testing New Materials

If you don't have a material listed in the material tables above or on the list of prohibited materials, you will need to drop off a material sample in the RPC. After dropping your material off, submit a job on DAAPspace exclusively for testing, separate and prior to your actual job. Include at least part of the geometry you intend to cut with the material so that we may include it in the testing.


Specifying Orientation

The Special Instructions/Concerns portion of the DAAPspace submission page is where the student informs the operator how to handle the material. It is important to identify the top versus the bottom side of the material (relative to the laser bed) and the corner of the material to be aligned at the origin (0,0,0). By default, the length of your material will be oriented along the x-axis of the machine, with the width on the y-axis. In woods, specify along which axis the grain should run. Mark these instructions on the material itself prior to submission.


Additional Preparation


Tabbing

Cutting Multiples / Flip Cutts

Kerf Width and Slot Fitting

Material Masking

Cleaning Materials

Comments

/groups/infocenter/search/index.rss?tag=hotlist/groups/infocenter/search/?tag=hotWhat’s HotHotListHot!?tag=hot10/groups/infocenter/sidebar/HotListklimescjColin Klimesh (klimescj)2017-12-05 17:01:26+00:002017-12-05 17:01:26updated79klimescjColin Klimesh (klimescj)2016-08-18 14:47:54+00:002016-08-18 14:47:54updated78higginbpBrian Higgins2012-08-08 17:26:07+00:002012-08-08 17:26:07updated77higginbpBrian Higgins2012-02-29 22:19:44+00:002012-02-29 22:19:44updated76higginbpBrian Higgins2012-02-15 21:33:10+00:002012-02-15 21:33:10updated75Added tag - printcombsbjBrandon Combs2012-02-10 15:31:27+00:002012-02-10 15:31:27addTag74combsbjBrandon Combs2011-12-17 19:57:49+00:002011-12-17 19:57:49updated73willi2enEthan Williams2011-10-19 14:03:05+00:002011-10-19 14:03:05updated72willi2enEthan Williams2011-10-19 14:01:54+00:002011-10-19 14:01:54updated71rootSystem Administrator2011-10-17 12:34:04+00:002011-10-17 12:34:04updated70added Workshop linklincoldsD. Scott Lincoln2011-10-14 18:40:22+00:002011-10-14 18:40:22updated69higginbpBrian Higgins2011-10-13 19:58:54+00:002011-10-13 19:58:54updated68higginbpBrian Higgins2011-10-13 19:56:44+00:002011-10-13 19:56:44updated67higginbpBrian Higgins2011-10-13 19:54:51+00:002011-10-13 19:54:51updated66higginbpBrian Higgins2011-10-13 19:54:42+00:002011-10-13 19:54:42updated65higginbpBrian Higgins2011-10-13 19:54:08+00:002011-10-13 19:54:08updated64higginbpBrian Higgins2011-10-13 19:25:26+00:002011-10-13 19:25:26updated63higginbpBrian Higgins2011-10-13 19:25:04+00:002011-10-13 19:25:04updated62higginbpBrian Higgins2011-10-13 19:24:29+00:002011-10-13 19:24:29updated61higginbpBrian Higgins2011-10-13 19:24:08+00:002011-10-13 19:24:08updated60hardmawwWesley Hardman2011-10-13 19:21:12+00:002011-10-13 19:21:12updated59higginbpBrian Higgins2011-10-13 18:52:06+00:002011-10-13 18:52:06updated58higginbpBrian Higgins2011-10-13 18:51:55+00:002011-10-13 18:51:55updated57higginbpBrian Higgins2011-10-13 18:50:40+00:002011-10-13 18:50:40updated56higginbpBrian Higgins2011-10-13 18:37:14+00:002011-10-13 18:37:14updated55higginbpBrian Higgins2011-10-13 18:31:58+00:002011-10-13 18:31:58updated54higginbpBrian Higgins2011-10-13 18:31:18+00:002011-10-13 18:31:18updated53higginbpBrian Higgins2011-10-13 18:26:19+00:002011-10-13 18:26:19updated52higginbpBrian Higgins2011-10-13 18:24:58+00:002011-10-13 18:24:58updated51Added tag - photo labhigginbpBrian Higgins2011-10-13 18:24:55+00:002011-10-13 18:24:55addTag50Added tag - cgchigginbpBrian Higgins2011-10-13 18:24:52+00:002011-10-13 18:24:52addTag49Added tag - rpchigginbpBrian Higgins2011-10-13 18:24:50+00:002011-10-13 18:24:50addTag48Added tag - generalhigginbpBrian Higgins2011-10-13 18:24:46+00:002011-10-13 18:24:46addTag47Added tag - informationhigginbpBrian Higgins2011-10-13 18:24:44+00:002011-10-13 18:24:44addTag46Added tag - hothigginbpBrian Higgins2011-10-13 18:24:34+00:002011-10-13 18:24:34addTag45higginbpBrian Higgins2011-10-13 18:21:37+00:002011-10-13 18:21:37updated44higginbpBrian Higgins2011-10-13 18:21:06+00:002011-10-13 18:21:06updated43higginbpBrian Higgins2011-10-13 18:20:55+00:002011-10-13 18:20:55updated42higginbpBrian Higgins2011-10-13 18:19:45+00:002011-10-13 18:19:45updated41higginbpBrian Higgins2011-10-13 18:19:20+00:002011-10-13 18:19:20updated40higginbpBrian Higgins2011-10-13 18:14:43+00:002011-10-13 18:14:43updated39higginbpBrian Higgins2011-10-13 17:55:58+00:002011-10-13 17:55:58updated38higginbpBrian Higgins2011-10-13 17:55:41+00:002011-10-13 17:55:41updated37higginbpBrian Higgins2011-10-13 17:54:14+00:002011-10-13 17:54:14updated36higginbpBrian Higgins2011-10-13 17:54:08+00:002011-10-13 17:54:08updated35hardmawwWesley Hardman2011-10-13 17:28:06+00:002011-10-13 17:28:06updated34hardmawwWesley Hardman2011-10-13 17:26:09+00:002011-10-13 17:26:09updated33hardmawwWesley Hardman2011-10-13 17:01:02+00:002011-10-13 17:01:02updated32hardmawwWesley Hardman2011-10-13 16:56:08+00:002011-10-13 16:56:08updated31hardmawwWesley Hardman2011-10-13 16:28:21+00:002011-10-13 16:28:21updated30hardmawwWesley Hardman2011-10-13 16:27:31+00:002011-10-13 16:27:31updated29hardmawwWesley Hardman2011-10-13 16:24:40+00:002011-10-13 16:24:40updated28Restored previous version ##20110712T191015ZhardmawwWesley Hardman2011-10-13 16:21:18+00:002011-10-13 16:21:18updated27willi2enEthan Williams2011-10-13 16:17:54+00:002011-10-13 16:17:54updated26Repairing bad index entryringlebtBrian Ringley2011-07-12 19:10:15+00:002011-07-12 19:10:15updated25ringlebtBrian Ringley2011-07-08 13:27:32+00:002011-07-08 13:27:32updated24rootSystem Administrator2011-07-01 15:52:17+00:002011-07-01 15:52:17updated23rootSystem Administrator2011-07-01 15:28:40+00:002011-07-01 15:28:40updated22rootSystem Administrator2011-07-01 15:28:04+00:002011-07-01 15:28:04updated21rootSystem Administrator2011-07-01 14:27:56+00:002011-07-01 14:27:56updated20rootSystem Administrator2011-07-01 14:26:25+00:002011-07-01 14:26:25updated19rootSystem Administrator2011-07-01 14:25:17+00:002011-07-01 14:25:17updated18rootSystem Administrator2011-07-01 14:23:54+00:002011-07-01 14:23:54updated17rootSystem Administrator2011-07-01 14:20:22+00:002011-07-01 14:20:22updated16rootSystem Administrator2011-07-01 14:19:40+00:002011-07-01 14:19:40updated15rootSystem Administrator2011-07-01 14:18:39+00:002011-07-01 14:18:39updated14rootSystem Administrator2011-07-01 14:18:13+00:002011-07-01 14:18:13updated13rootSystem Administrator2011-07-01 14:17:52+00:002011-07-01 14:17:52updated12ringlebtBrian Ringley2011-06-28 21:02:48+00:002011-06-28 21:02:48updated11ringlebtBrian Ringley2011-06-28 21:01:45+00:002011-06-28 21:01:45updated10lincoldsD. Scott Lincoln2011-06-28 20:58:12+00:002011-06-28 20:58:12updated9ringlebtBrian Ringley2011-06-28 20:58:07+00:002011-06-28 20:58:07updated8lincoldsD. Scott Lincoln2011-06-28 20:55:54+00:002011-06-28 20:55:54updated7ringlebtBrian Ringley2011-06-28 20:53:57+00:002011-06-28 20:53:57updated6lincoldsD. Scott Lincoln2011-06-28 20:52:46+00:002011-06-28 20:52:46updated5ringlebtBrian Ringley2011-06-28 20:51:43+00:002011-06-28 20:51:43updated4ringlebtBrian Ringley2009-09-28 19:37:19+00:002009-09-28 19:37:19updated3akinspePete Akins2009-07-14 19:03:35+00:002009-07-14 19:03:35updated2First createdakinspePete Akins2009-07-14 17:12:59+00:002009-07-14 17:12:59created1wiki2017-12-05T17:01:26+00:00groups/infocenter/wiki/welcomeFalseDAAP Info Center/groups/infocenter/wiki/welcome/DAAP_Info_Center.htmlColin Klimesh (klimescj)79 updatesDAAP Info Center [DAAP_37-2.jpg] If you are new to UC or DAAP, or just haven't been to the CGC in a while, you might not know about all the services DAAP has to offer...Falseklimescj2017-12-05T17:01:26+00:00whitsoeaElizabeth Whitson2015-08-26 18:14:35+00:002015-08-26 18:14:35updated9Added tag - 2015whitsoeaElizabeth Whitson2015-08-26 18:14:32+00:002015-08-26 18:14:32addTag8whitsoeaElizabeth Whitson2015-08-26 18:14:10+00:002015-08-26 18:14:10updated7whitsoeaElizabeth Whitson2014-11-21 18:46:16+00:002014-11-21 18:46:16updated6Added tag - hotwhitsoeaElizabeth Whitson2014-11-21 18:46:09+00:002014-11-21 18:46:09addTag5Added tag - personal drivewhitsoeaElizabeth Whitson2014-11-21 18:45:07+00:002014-11-21 18:45:07addTag4Added tag - h drivewhitsoeaElizabeth Whitson2014-11-21 18:45:03+00:002014-11-21 18:45:03addTag3Added tag - ucfilespacewhitsoeaElizabeth Whitson2014-11-21 18:44:55+00:002014-11-21 18:44:55addTag2First createdwhitsoeaElizabeth Whitson2014-11-21 18:42:25+00:002014-11-21 18:42:25created1wiki2015-08-26T18:14:35+00:00groups/infocenter/wiki/03344FalseMapping (H:) Drive - UCFileSpace /groups/infocenter/wiki/03344/Mapping_H_Drive__UCFileSpace_.htmlElizabeth Whitson9 updatesMapping (H:) Drive - UCFileSpace Follow the link below to learn how to map the (H:) drive to your machine. UCit Instructions for Mapping Drive Falsewhitsoea2015-08-26T18:14:35+00:00germannmNicholas Germann2013-11-14 16:09:12+00:002013-11-14 16:09:12updated118germannmNicholas Germann2013-07-02 19:26:30+00:002013-07-02 19:26:30updated117germannmNicholas Germann2013-07-02 19:02:36+00:002013-07-02 19:02:36updated116germannmNicholas Germann2013-07-02 18:57:38+00:002013-07-02 18:57:38updated115germannmNicholas Germann2013-07-02 18:51:29+00:002013-07-02 18:51:29updated114germannmNicholas Germann2013-07-01 19:17:11+00:002013-07-01 19:17:11updated113germannmNicholas Germann2013-07-01 15:57:50+00:002013-07-01 15:57:50updated112germannmNicholas Germann2013-07-01 14:57:00+00:002013-07-01 14:57:00updated111germannmNicholas Germann2013-07-01 14:52:02+00:002013-07-01 14:52:02updated110germannmNicholas Germann2013-06-28 21:37:27+00:002013-06-28 21:37:27updated109germannmNicholas Germann2013-06-27 18:55:27+00:002013-06-27 18:55:27updated108germannmNicholas Germann2013-06-27 15:04:37+00:002013-06-27 15:04:37updated107germannmNicholas Germann2013-06-27 14:19:12+00:002013-06-27 14:19:12updated106germannmNicholas Germann2013-06-27 13:39:21+00:002013-06-27 13:39:21updated105germannmNicholas Germann2013-06-26 15:21:44+00:002013-06-26 15:21:44updated104germannmNicholas Germann2013-06-26 15:19:11+00:002013-06-26 15:19:11updated103germannmNicholas Germann2013-06-26 14:45:10+00:002013-06-26 14:45:10updated102germannmNicholas Germann2013-06-26 14:44:14+00:002013-06-26 14:44:14updated101germannmNicholas Germann2013-06-26 14:42:11+00:002013-06-26 14:42:11updated100germannmNicholas Germann2013-06-26 14:27:39+00:002013-06-26 14:27:39updated99germannmNicholas Germann2013-06-26 14:27:08+00:002013-06-26 14:27:08updated98germannmNicholas Germann2013-06-26 14:25:52+00:002013-06-26 14:25:52updated97germannmNicholas Germann2013-06-26 14:14:29+00:002013-06-26 14:14:29updated96germannmNicholas Germann2013-06-24 17:18:28+00:002013-06-24 17:18:28updated95germannmNicholas Germann2013-06-24 17:15:45+00:002013-06-24 17:15:45updated94germannmNicholas Germann2013-06-24 16:56:18+00:002013-06-24 16:56:18updated93germannmNicholas Germann2013-06-24 16:52:09+00:002013-06-24 16:52:09updated92germannmNicholas Germann2013-02-12 23:40:38+00:002013-02-12 23:40:38updated91germannmNicholas Germann2013-02-12 15:54:22+00:002013-02-12 15:54:22updated90germannmNicholas Germann2013-02-12 15:47:17+00:002013-02-12 15:47:17updated89germannmNicholas Germann2013-02-12 15:40:43+00:002013-02-12 15:40:43updated88germannmNicholas Germann2013-02-12 15:39:29+00:002013-02-12 15:39:29updated87germannmNicholas Germann2013-01-16 18:38:42+00:002013-01-16 18:38:42updated86germannmNicholas Germann2013-01-09 16:01:21+00:002013-01-09 16:01:21updated85germannmNicholas Germann2013-01-08 19:56:52+00:002013-01-08 19:56:52updated84germannmNicholas Germann2013-01-08 19:48:44+00:002013-01-08 19:48:44updated83germannmNicholas Germann2013-01-08 19:30:28+00:002013-01-08 19:30:28updated82germannmNicholas Germann2013-01-08 18:56:53+00:002013-01-08 18:56:53updated81germannmNicholas Germann2012-07-13 13:59:35+00:002012-07-13 13:59:35updated80germannmNicholas Germann2012-07-11 21:17:59+00:002012-07-11 21:17:59updated79germannmNicholas Germann2012-07-11 20:51:32+00:002012-07-11 20:51:32updated78germannmNicholas Germann2012-07-10 18:45:21+00:002012-07-10 18:45:21updated77germannmNicholas Germann2012-07-10 18:25:44+00:002012-07-10 18:25:44updated76germannmNicholas Germann2012-07-10 16:13:34+00:002012-07-10 16:13:34updated75germannmNicholas Germann2012-07-09 21:41:42+00:002012-07-09 21:41:42updated74germannmNicholas Germann2012-07-09 21:34:18+00:002012-07-09 21:34:18updated73germannmNicholas Germann2012-07-09 21:20:29+00:002012-07-09 21:20:29updated72germannmNicholas Germann2012-07-09 21:01:01+00:002012-07-09 21:01:01updated71germannmNicholas Germann2012-07-09 20:52:33+00:002012-07-09 20:52:33updated70germannmNicholas Germann2012-07-09 20:48:44+00:002012-07-09 20:48:44updated69germannmNicholas Germann2012-07-09 20:48:09+00:002012-07-09 20:48:09updated68germannmNicholas Germann2012-07-09 20:47:54+00:002012-07-09 20:47:54updated67germannmNicholas Germann2012-07-09 20:47:35+00:002012-07-09 20:47:35updated66germannmNicholas Germann2012-07-09 20:01:05+00:002012-07-09 20:01:05updated65germannmNicholas Germann2012-07-09 19:59:50+00:002012-07-09 19:59:50updated64germannmNicholas Germann2012-07-09 19:57:37+00:002012-07-09 19:57:37updated63germannmNicholas Germann2012-07-09 19:50:06+00:002012-07-09 19:50:06updated62germannmNicholas Germann2012-07-09 19:47:38+00:002012-07-09 19:47:38updated61germannmNicholas Germann2012-07-09 19:18:43+00:002012-07-09 19:18:43updated60germannmNicholas Germann2012-07-09 15:35:47+00:002012-07-09 15:35:47updated59germannmNicholas Germann2012-07-09 15:24:35+00:002012-07-09 15:24:35updated58germannmNicholas Germann2012-07-09 15:23:32+00:002012-07-09 15:23:32updated57germannmNicholas Germann2012-07-03 17:40:47+00:002012-07-03 17:40:47updated56germannmNicholas Germann2012-07-03 17:38:08+00:002012-07-03 17:38:08updated55germannmNicholas Germann2012-07-03 16:43:50+00:002012-07-03 16:43:50updated54germannmNicholas Germann2012-07-03 16:43:08+00:002012-07-03 16:43:08updated53germannmNicholas Germann2012-07-03 15:25:28+00:002012-07-03 15:25:28updated52germannmNicholas Germann2012-07-03 14:40:56+00:002012-07-03 14:40:56updated51germannmNicholas Germann2012-06-29 17:50:00+00:002012-06-29 17:50:00updated50germannmNicholas Germann2012-06-29 16:54:52+00:002012-06-29 16:54:52updated49germannmNicholas Germann2012-06-29 16:46:15+00:002012-06-29 16:46:15updated48germannmNicholas Germann2012-06-29 16:41:34+00:002012-06-29 16:41:34updated47germannmNicholas Germann2012-06-29 16:36:48+00:002012-06-29 16:36:48updated46germannmNicholas Germann2012-06-29 16:29:47+00:002012-06-29 16:29:47updated45germannmNicholas Germann2012-06-29 16:27:02+00:002012-06-29 16:27:02updated44germannmNicholas Germann2012-06-29 16:23:37+00:002012-06-29 16:23:37updated43germannmNicholas Germann2012-06-29 16:19:33+00:002012-06-29 16:19:33updated42germannmNicholas Germann2012-06-29 16:13:13+00:002012-06-29 16:13:13updated41germannmNicholas Germann2012-06-29 15:03:18+00:002012-06-29 15:03:18updated40germannmNicholas Germann2012-06-26 16:06:11+00:002012-06-26 16:06:11updated39germannmNicholas Germann2012-06-26 15:07:00+00:002012-06-26 15:07:00updated38germannmNicholas Germann2012-06-26 15:02:50+00:002012-06-26 15:02:50updated37germannmNicholas Germann2012-06-25 22:14:54+00:002012-06-25 22:14:54updated36germannmNicholas Germann2012-06-25 21:06:38+00:002012-06-25 21:06:38updated35germannmNicholas Germann2012-06-22 21:38:30+00:002012-06-22 21:38:30updated34germannmNicholas Germann2012-06-22 20:27:56+00:002012-06-22 20:27:56updated33germannmNicholas Germann2012-06-22 20:24:52+00:002012-06-22 20:24:52updated32germannmNicholas Germann2012-06-22 19:36:27+00:002012-06-22 19:36:27updated31germannmNicholas Germann2012-06-22 18:59:27+00:002012-06-22 18:59:27updated30germannmNicholas Germann2012-06-22 18:58:16+00:002012-06-22 18:58:16updated29germannmNicholas Germann2012-06-22 18:57:03+00:002012-06-22 18:57:03updated28germannmNicholas Germann2012-06-22 18:55:37+00:002012-06-22 18:55:37updated27germannmNicholas Germann2012-06-22 18:55:08+00:002012-06-22 18:55:08updated26germannmNicholas Germann2012-06-22 18:15:56+00:002012-06-22 18:15:56updated25germannmNicholas Germann2012-06-22 18:15:44+00:002012-06-22 18:15:44updated24germannmNicholas Germann2012-06-22 18:13:41+00:002012-06-22 18:13:41updated23germannmNicholas Germann2012-06-22 17:45:02+00:002012-06-22 17:45:02updated22germannmNicholas Germann2012-06-22 17:20:45+00:002012-06-22 17:20:45updated21germannmNicholas Germann2012-06-22 17:02:13+00:002012-06-22 17:02:13updated20germannmNicholas Germann2012-06-22 16:30:25+00:002012-06-22 16:30:25updated19germannmNicholas Germann2012-06-22 16:28:52+00:002012-06-22 16:28:52updated18germannmNicholas Germann2012-06-22 15:37:25+00:002012-06-22 15:37:25updated17germannmNicholas Germann2012-06-21 21:21:43+00:002012-06-21 21:21:43updated16germannmNicholas Germann2012-06-21 21:16:28+00:002012-06-21 21:16:28updated15germannmNicholas Germann2012-06-21 21:01:27+00:002012-06-21 21:01:27updated14germannmNicholas Germann2012-06-21 20:28:26+00:002012-06-21 20:28:26updated13germannmNicholas Germann2012-06-21 19:45:54+00:002012-06-21 19:45:54updated12germannmNicholas Germann2012-06-21 19:04:41+00:002012-06-21 19:04:41updated11germannmNicholas Germann2012-06-20 17:37:46+00:002012-06-20 17:37:46updated10germannmNicholas Germann2012-06-20 16:58:54+00:002012-06-20 16:58:54updated9germannmNicholas Germann2012-06-20 16:57:14+00:002012-06-20 16:57:14updated8germannmNicholas Germann2012-06-20 16:54:42+00:002012-06-20 16:54:42updated7germannmNicholas Germann2012-06-20 16:54:12+00:002012-06-20 16:54:12updated6germannmNicholas Germann2012-06-20 16:53:24+00:002012-06-20 16:53:24updated5germannmNicholas Germann2012-06-20 16:53:12+00:002012-06-20 16:53:12updated4germannmNicholas Germann2012-06-20 16:52:39+00:002012-06-20 16:52:39updated3Added tag - hotgermannmNicholas Germann2012-06-20 16:50:31+00:002012-06-20 16:50:31addTag2First createdgermannmNicholas Germann2012-06-20 16:50:11+00:002012-06-20 16:50:11created1wiki2013-11-14T16:09:12+00:00groups/infocenter/wiki/f8f44FalseFlat Stock Material Tutorials/groups/infocenter/wiki/f8f44/Flat_Stock_Material_Tutorials.htmlNicholas Germann118 updatesFlat Stock Material Tutorials Back to Komo VR 510 Router [2half_axis_programming.jpg] [3_axis_programming.jpg] General Information To Consider Materi...Falsegermannm2013-11-14T16:09:12+00:00germannmNicholas Germann2013-11-14 16:09:12+00:002013-11-14 16:09:12updated118germannmNicholas Germann2013-07-02 19:26:30+00:002013-07-02 19:26:30updated117germannmNicholas Germann2013-07-02 19:02:36+00:002013-07-02 19:02:36updated116germannmNicholas Germann2013-07-02 18:57:38+00:002013-07-02 18:57:38updated115germannmNicholas Germann2013-07-02 18:51:29+00:002013-07-02 18:51:29updated114germannmNicholas Germann2013-07-01 19:17:11+00:002013-07-01 19:17:11updated113germannmNicholas Germann2013-07-01 15:57:50+00:002013-07-01 15:57:50updated112germannmNicholas Germann2013-07-01 14:57:00+00:002013-07-01 14:57:00updated111germannmNicholas Germann2013-07-01 14:52:02+00:002013-07-01 14:52:02updated110germannmNicholas Germann2013-06-28 21:37:27+00:002013-06-28 21:37:27updated109germannmNicholas Germann2013-06-27 18:55:27+00:002013-06-27 18:55:27updated108germannmNicholas Germann2013-06-27 15:04:37+00:002013-06-27 15:04:37updated107germannmNicholas Germann2013-06-27 14:19:12+00:002013-06-27 14:19:12updated106germannmNicholas Germann2013-06-27 13:39:21+00:002013-06-27 13:39:21updated105germannmNicholas Germann2013-06-26 15:21:44+00:002013-06-26 15:21:44updated104germannmNicholas Germann2013-06-26 15:19:11+00:002013-06-26 15:19:11updated103germannmNicholas Germann2013-06-26 14:45:10+00:002013-06-26 14:45:10updated102germannmNicholas Germann2013-06-26 14:44:14+00:002013-06-26 14:44:14updated101germannmNicholas Germann2013-06-26 14:42:11+00:002013-06-26 14:42:11updated100germannmNicholas Germann2013-06-26 14:27:39+00:002013-06-26 14:27:39updated99germannmNicholas Germann2013-06-26 14:27:08+00:002013-06-26 14:27:08updated98germannmNicholas Germann2013-06-26 14:25:52+00:002013-06-26 14:25:52updated97germannmNicholas Germann2013-06-26 14:14:29+00:002013-06-26 14:14:29updated96germannmNicholas Germann2013-06-24 17:18:28+00:002013-06-24 17:18:28updated95germannmNicholas Germann2013-06-24 17:15:45+00:002013-06-24 17:15:45updated94germannmNicholas Germann2013-06-24 16:56:18+00:002013-06-24 16:56:18updated93germannmNicholas Germann2013-06-24 16:52:09+00:002013-06-24 16:52:09updated92germannmNicholas Germann2013-02-12 23:40:38+00:002013-02-12 23:40:38updated91germannmNicholas Germann2013-02-12 15:54:22+00:002013-02-12 15:54:22updated90germannmNicholas Germann2013-02-12 15:47:17+00:002013-02-12 15:47:17updated89germannmNicholas Germann2013-02-12 15:40:43+00:002013-02-12 15:40:43updated88germannmNicholas Germann2013-02-12 15:39:29+00:002013-02-12 15:39:29updated87germannmNicholas Germann2013-01-16 18:38:42+00:002013-01-16 18:38:42updated86germannmNicholas Germann2013-01-09 16:01:21+00:002013-01-09 16:01:21updated85germannmNicholas Germann2013-01-08 19:56:52+00:002013-01-08 19:56:52updated84germannmNicholas Germann2013-01-08 19:48:44+00:002013-01-08 19:48:44updated83germannmNicholas Germann2013-01-08 19:30:28+00:002013-01-08 19:30:28updated82germannmNicholas Germann2013-01-08 18:56:53+00:002013-01-08 18:56:53updated81germannmNicholas Germann2012-07-13 13:59:35+00:002012-07-13 13:59:35updated80germannmNicholas Germann2012-07-11 21:17:59+00:002012-07-11 21:17:59updated79germannmNicholas Germann2012-07-11 20:51:32+00:002012-07-11 20:51:32updated78germannmNicholas Germann2012-07-10 18:45:21+00:002012-07-10 18:45:21updated77germannmNicholas Germann2012-07-10 18:25:44+00:002012-07-10 18:25:44updated76germannmNicholas Germann2012-07-10 16:13:34+00:002012-07-10 16:13:34updated75germannmNicholas Germann2012-07-09 21:41:42+00:002012-07-09 21:41:42updated74germannmNicholas Germann2012-07-09 21:34:18+00:002012-07-09 21:34:18updated73germannmNicholas Germann2012-07-09 21:20:29+00:002012-07-09 21:20:29updated72germannmNicholas Germann2012-07-09 21:01:01+00:002012-07-09 21:01:01updated71germannmNicholas Germann2012-07-09 20:52:33+00:002012-07-09 20:52:33updated70germannmNicholas Germann2012-07-09 20:48:44+00:002012-07-09 20:48:44updated69germannmNicholas Germann2012-07-09 20:48:09+00:002012-07-09 20:48:09updated68germannmNicholas Germann2012-07-09 20:47:54+00:002012-07-09 20:47:54updated67germannmNicholas Germann2012-07-09 20:47:35+00:002012-07-09 20:47:35updated66germannmNicholas Germann2012-07-09 20:01:05+00:002012-07-09 20:01:05updated65germannmNicholas Germann2012-07-09 19:59:50+00:002012-07-09 19:59:50updated64germannmNicholas Germann2012-07-09 19:57:37+00:002012-07-09 19:57:37updated63germannmNicholas Germann2012-07-09 19:50:06+00:002012-07-09 19:50:06updated62germannmNicholas Germann2012-07-09 19:47:38+00:002012-07-09 19:47:38updated61germannmNicholas Germann2012-07-09 19:18:43+00:002012-07-09 19:18:43updated60germannmNicholas Germann2012-07-09 15:35:47+00:002012-07-09 15:35:47updated59germannmNicholas Germann2012-07-09 15:24:35+00:002012-07-09 15:24:35updated58germannmNicholas Germann2012-07-09 15:23:32+00:002012-07-09 15:23:32updated57germannmNicholas Germann2012-07-03 17:40:47+00:002012-07-03 17:40:47updated56germannmNicholas Germann2012-07-03 17:38:08+00:002012-07-03 17:38:08updated55germannmNicholas Germann2012-07-03 16:43:50+00:002012-07-03 16:43:50updated54germannmNicholas Germann2012-07-03 16:43:08+00:002012-07-03 16:43:08updated53germannmNicholas Germann2012-07-03 15:25:28+00:002012-07-03 15:25:28updated52germannmNicholas Germann2012-07-03 14:40:56+00:002012-07-03 14:40:56updated51germannmNicholas Germann2012-06-29 17:50:00+00:002012-06-29 17:50:00updated50germannmNicholas Germann2012-06-29 16:54:52+00:002012-06-29 16:54:52updated49germannmNicholas Germann2012-06-29 16:46:15+00:002012-06-29 16:46:15updated48germannmNicholas Germann2012-06-29 16:41:34+00:002012-06-29 16:41:34updated47germannmNicholas Germann2012-06-29 16:36:48+00:002012-06-29 16:36:48updated46germannmNicholas Germann2012-06-29 16:29:47+00:002012-06-29 16:29:47updated45germannmNicholas Germann2012-06-29 16:27:02+00:002012-06-29 16:27:02updated44germannmNicholas Germann2012-06-29 16:23:37+00:002012-06-29 16:23:37updated43germannmNicholas Germann2012-06-29 16:19:33+00:002012-06-29 16:19:33updated42germannmNicholas Germann2012-06-29 16:13:13+00:002012-06-29 16:13:13updated41germannmNicholas Germann2012-06-29 15:03:18+00:002012-06-29 15:03:18updated40germannmNicholas Germann2012-06-26 16:06:11+00:002012-06-26 16:06:11updated39germannmNicholas Germann2012-06-26 15:07:00+00:002012-06-26 15:07:00updated38germannmNicholas Germann2012-06-26 15:02:50+00:002012-06-26 15:02:50updated37germannmNicholas Germann2012-06-25 22:14:54+00:002012-06-25 22:14:54updated36germannmNicholas Germann2012-06-25 21:06:38+00:002012-06-25 21:06:38updated35germannmNicholas Germann2012-06-22 21:38:30+00:002012-06-22 21:38:30updated34germannmNicholas Germann2012-06-22 20:27:56+00:002012-06-22 20:27:56updated33germannmNicholas Germann2012-06-22 20:24:52+00:002012-06-22 20:24:52updated32germannmNicholas Germann2012-06-22 19:36:27+00:002012-06-22 19:36:27updated31germannmNicholas Germann2012-06-22 18:59:27+00:002012-06-22 18:59:27updated30germannmNicholas Germann2012-06-22 18:58:16+00:002012-06-22 18:58:16updated29germannmNicholas Germann2012-06-22 18:57:03+00:002012-06-22 18:57:03updated28germannmNicholas Germann2012-06-22 18:55:37+00:002012-06-22 18:55:37updated27germannmNicholas Germann2012-06-22 18:55:08+00:002012-06-22 18:55:08updated26germannmNicholas Germann2012-06-22 18:15:56+00:002012-06-22 18:15:56updated25germannmNicholas Germann2012-06-22 18:15:44+00:002012-06-22 18:15:44updated24germannmNicholas Germann2012-06-22 18:13:41+00:002012-06-22 18:13:41updated23germannmNicholas Germann2012-06-22 17:45:02+00:002012-06-22 17:45:02updated22germannmNicholas Germann2012-06-22 17:20:45+00:002012-06-22 17:20:45updated21germannmNicholas Germann2012-06-22 17:02:13+00:002012-06-22 17:02:13updated20germannmNicholas Germann2012-06-22 16:30:25+00:002012-06-22 16:30:25updated19germannmNicholas Germann2012-06-22 16:28:52+00:002012-06-22 16:28:52updated18germannmNicholas Germann2012-06-22 15:37:25+00:002012-06-22 15:37:25updated17germannmNicholas Germann2012-06-21 21:21:43+00:002012-06-21 21:21:43updated16germannmNicholas Germann2012-06-21 21:16:28+00:002012-06-21 21:16:28updated15germannmNicholas Germann2012-06-21 21:01:27+00:002012-06-21 21:01:27updated14germannmNicholas Germann2012-06-21 20:28:26+00:002012-06-21 20:28:26updated13germannmNicholas Germann2012-06-21 19:45:54+00:002012-06-21 19:45:54updated12germannmNicholas Germann2012-06-21 19:04:41+00:002012-06-21 19:04:41updated11germannmNicholas Germann2012-06-20 17:37:46+00:002012-06-20 17:37:46updated10germannmNicholas Germann2012-06-20 16:58:54+00:002012-06-20 16:58:54updated9germannmNicholas Germann2012-06-20 16:57:14+00:002012-06-20 16:57:14updated8germannmNicholas Germann2012-06-20 16:54:42+00:002012-06-20 16:54:42updated7germannmNicholas Germann2012-06-20 16:54:12+00:002012-06-20 16:54:12updated6germannmNicholas Germann2012-06-20 16:53:24+00:002012-06-20 16:53:24updated5germannmNicholas Germann2012-06-20 16:53:12+00:002012-06-20 16:53:12updated4germannmNicholas Germann2012-06-20 16:52:39+00:002012-06-20 16:52:39updated3Added tag - hotgermannmNicholas Germann2012-06-20 16:50:31+00:002012-06-20 16:50:31addTag2First createdgermannmNicholas Germann2012-06-20 16:50:11+00:002012-06-20 16:50:11created1wiki2013-11-14T16:09:12+00:00groups/infocenter/wiki/f8f44FalseFlat Stock Material Tutorials/groups/infocenter/wiki/f8f44/Flat_Stock_Material_Tutorials.htmlNicholas Germann118 updatesFlat Stock Material Tutorials Back to Komo VR 510 Router [2half_axis_programming.jpg] [3_axis_programming.jpg] General Information To Consider Materi...Falsegermannm2013-11-14T16:09:12+00:00higginbpBrian Higgins2013-08-09 18:31:40+00:002013-08-09 18:31:40updated49higginbpBrian Higgins2013-08-09 18:31:36+00:002013-08-09 18:31:36updated48whitsoeaElizabeth Whitson2013-05-07 18:56:34+00:002013-05-07 18:56:34updated47willi2enEthan Williams2012-02-14 14:32:18+00:002012-02-14 14:32:18updated46willi2enEthan Williams2012-02-14 14:31:05+00:002012-02-14 14:31:05updated45okorosmmMichelle Okoroski2012-02-10 15:39:17+00:002012-02-10 15:39:17updated44higginbpBrian Higgins2012-01-10 19:03:20+00:002012-01-10 19:03:20updated43higginbpBrian Higgins2012-01-10 19:03:11+00:002012-01-10 19:03:11updated42higginbpBrian Higgins2012-01-10 19:02:56+00:002012-01-10 19:02:56updated41higginbpBrian Higgins2012-01-10 19:02:31+00:002012-01-10 19:02:31updated40higginbpBrian Higgins2012-01-10 19:02:22+00:002012-01-10 19:02:22updated39higginbpBrian Higgins2012-01-10 19:02:13+00:002012-01-10 19:02:13updated38higginbpBrian Higgins2012-01-10 19:01:36+00:002012-01-10 19:01:36updated37higginbpBrian Higgins2012-01-10 19:01:01+00:002012-01-10 19:01:01updated36higginbpBrian Higgins2012-01-10 19:00:52+00:002012-01-10 19:00:52updated35higginbpBrian Higgins2012-01-10 18:59:30+00:002012-01-10 18:59:30updated34higginbpBrian Higgins2012-01-10 18:52:42+00:002012-01-10 18:52:42updated33higginbpBrian Higgins2012-01-10 18:52:04+00:002012-01-10 18:52:04updated32higginbpBrian Higgins2012-01-10 18:51:48+00:002012-01-10 18:51:48updated31higginbpBrian Higgins2012-01-10 18:51:23+00:002012-01-10 18:51:23updated30higginbpBrian Higgins2011-10-13 22:13:46+00:002011-10-13 22:13:46updated29higginbpBrian Higgins2011-10-13 22:11:02+00:002011-10-13 22:11:02updated28higginbpBrian Higgins2011-10-13 21:59:56+00:002011-10-13 21:59:56updated27higginbpBrian Higgins2011-10-13 21:59:05+00:002011-10-13 21:59:05updated26higginbpBrian Higgins2011-10-13 21:57:08+00:002011-10-13 21:57:08updated25higginbpBrian Higgins2011-10-13 21:54:33+00:002011-10-13 21:54:33updated24higginbpBrian Higgins2011-10-13 21:54:10+00:002011-10-13 21:54:10updated23higginbpBrian Higgins2011-10-13 20:36:03+00:002011-10-13 20:36:03updated22higginbpBrian Higgins2011-10-13 19:58:07+00:002011-10-13 19:58:07updated21Added tag - hothigginbpBrian Higgins2011-10-13 19:58:06+00:002011-10-13 19:58:06addTag20Added tag - tutorialshigginbpBrian Higgins2011-10-13 19:58:03+00:002011-10-13 19:58:03addTag19Added tag - tutorialhigginbpBrian Higgins2011-10-13 19:57:54+00:002011-10-13 19:57:54addTag18Added tag - cgc informationhigginbpBrian Higgins2011-10-13 19:57:49+00:002011-10-13 19:57:49addTag17Added tag - cgchigginbpBrian Higgins2011-10-13 19:57:44+00:002011-10-13 19:57:44addTag16higginbpBrian Higgins2011-10-13 19:57:39+00:002011-10-13 19:57:39updated15higginbpBrian Higgins2011-10-13 19:51:33+00:002011-10-13 19:51:33updated14higginbpBrian Higgins2011-10-13 19:50:55+00:002011-10-13 19:50:55updated13higginbpBrian Higgins2011-10-13 19:39:03+00:002011-10-13 19:39:03updated12higginbpBrian Higgins2011-10-13 19:30:16+00:002011-10-13 19:30:16updated11higginbpBrian Higgins2011-10-13 19:29:42+00:002011-10-13 19:29:42updated10higginbpBrian Higgins2011-10-13 19:28:18+00:002011-10-13 19:28:18updated9higginbpBrian Higgins2011-10-13 19:27:11+00:002011-10-13 19:27:11updated8higginbpBrian Higgins2011-10-13 18:23:12+00:002011-10-13 18:23:12updated7higginbpBrian Higgins2011-10-13 18:19:57+00:002011-10-13 18:19:57updated6higginbpBrian Higgins2011-10-13 18:16:27+00:002011-10-13 18:16:27updated5higginbpBrian Higgins2011-10-13 18:04:52+00:002011-10-13 18:04:52updated4Repairing bad index entryrootSystem Administrator2011-07-13 14:49:42+00:002011-07-13 14:49:42updated3rootSystem Administrator2011-07-01 14:22:42+00:002011-07-01 14:22:42updated2First createdrootSystem Administrator2011-07-01 14:22:33+00:002011-07-01 14:22:33created1wiki2013-08-09T18:31:40+00:00groups/infocenter/wiki/85f12FalseDAAP CGC/groups/infocenter/wiki/85f12/DAAP_CGC.htmlBrian Higgins49 updatesDAAP CGC Computer Graphics Center Information [_MG_6981.jpg] On this page you will find links to various resources that the CGC provides to both st...Falsehigginbp2013-08-09T18:31:40+00:00hot/groups/infocenter/search/index.rss?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcomelist/groups/infocenter/search/?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcomeRecent ChangesRecentChangesListUpdates?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcome0/groups/infocenter/sidebar/RecentChangesListmodifiedDateallRecent ChangesRecentChangesListUpdateswiki/welcomeNo recent changes.reverse5search