uPrint ABS Extrusion Printer

Back to 3D Printing

Instructions

Summary

General Information

  • Similar to all additive technologies, the ABS printer builds layer cross-sections that stack upon each other sequentially, from the bottommost to the topmost.
  • The resulting parts are stronger and more flexible compared to powder printed parts.
  • The build envelop for our uPrint SE plastic printer machine is: 6" deep(150mm) x 8"(203mm) wide x 6"(150mm) tall. The build resolution is 0.01" per layer. This is dictated by the extrusion diameter of the ABS filament.
  • Unlike the powder printers, a separate support structure is needed to maintain the parts integrity during the build process. This structure is printed out of a separate, water soluble material which is later dissolved in a heated water/lye bath.
  • The cost per cubic inch (in3) of the ABS and the support material is $5.00, machine time is $0.03 per minute, and a $5.25 for the build plate
  • The cost of a part (if modeled solid) can be reduced through the manipulation of the density that the ABS is put down. You can choose full solid" or half solid". Please specify this information in the "Special Instructions" portion of your Online Job Submission

Expected Results

  • The resulting parts have good tensile strength and share the material behaviors of plastics.
  • Shallow surfaces (i.e. surfaces slightly off the horizontal plane) show the step resolution more than steep surfaces (i.e. surfaces slightly off the vertical plane). This can be minimized through the manipulation of the part orientation.
  • Lower density parts can sometimes fill with liquid when they are cleaned in the water/lye solution.

Pricing

Pricing breaks down to three components: material, build time, and labor.

  • Build Material: Material cost $5 per cubic inch
  • Support Material: Support material cost $5 per cubic inch. This material will be dissolved in a lye bath after the print is done. The result is a clean print with no additional labor required to remove support structures.
  • Build Time: This is time that a build for the machine will take. The build time for the machine is $0.03 per minute.
  • Typical build times are 1 hour per 1cm at a 0.01" build layer. Many of our builds exceed 10 hours.
  • Build Plate: $5.25 per build plate. Large jobs with multiple parts may require the use of multiple build plates.
  • As with all RPC job submissions, a cost estimate will be given that the client will need to approve to start the process. The cost will never exceed the estimate, and any cost savings are returned to the client.

General File Preparation

  • Only surfaces that form a closed object can be 3D printed. The closed surface/polysurface model must be converted into a solid object, which is described by the *.STL file.
  • Create surfaces with no gaps (trim, etc.).
  • Unify the Surface Normals of each object. Normals should be pointing toward the exterior (non-printed space) of the object.
  • Wall thickness (dependent on the geometry): For parts with thin walls, normal engineering practices of adding ribs for support, creating fillets, reinforcing edges, and/or minimizing spans can be used. This helps to insure that your part is produced with accuracy and strength.
  • Wall thickness should not be less than 1/16 inch. Anything less will be printed at the designers discretion!
  • Reduce cost: Solid parts can be printed with lower density, or parts can be split apart and shelled and printed in such a way that that do not need additional support material.
  • Fitting parts: Very thin or spindly parts should be constructed from a different material as they are vulnerable to break.
  • When parts are designed to connect to a 3D printed model, the 3D printed model should incorporate a mating socket or groove. Users must offset mating walls negative 0.010 inch per occurrence, (the part expands by this amount during the printing process).
  • Scale: Be aware of the scale and units of the CAD model.

Detailed File Preparation

The file format that RPC accepts for resin printing is an *.STL file. The *.STL file needs to be a valid enclosed volume and devoid of self intersecting triangles, inverted normals, and noise shells, among other common mesh problems.

Autodesk 3ds Max


Autodesk Alias 2010


Google SketchUp Pro 7


Rhino 5


SolidWorks 2010


Autodesk Maya 2010


Back to 3D Printing

Comments

/groups/infocenter/search/index.rss?tag=hotlist/groups/infocenter/search/?tag=hotWhat’s HotHotListHot!?tag=hot10/groups/infocenter/sidebar/HotListklimescjColin Klimesh (klimescj)2016-08-18 14:47:54+00:002016-08-18 14:47:54updated78higginbpBrian Higgins2012-08-08 17:26:07+00:002012-08-08 17:26:07updated77higginbpBrian Higgins2012-02-29 22:19:44+00:002012-02-29 22:19:44updated76higginbpBrian Higgins2012-02-15 21:33:10+00:002012-02-15 21:33:10updated75Added tag - printcombsbjBrandon Combs2012-02-10 15:31:27+00:002012-02-10 15:31:27addTag74combsbjBrandon Combs2011-12-17 19:57:49+00:002011-12-17 19:57:49updated73willi2enEthan Williams2011-10-19 14:03:05+00:002011-10-19 14:03:05updated72willi2enEthan Williams2011-10-19 14:01:54+00:002011-10-19 14:01:54updated71rootSystem Administrator2011-10-17 12:34:04+00:002011-10-17 12:34:04updated70added Workshop linklincoldsD. Scott Lincoln2011-10-14 18:40:22+00:002011-10-14 18:40:22updated69higginbpBrian Higgins2011-10-13 19:58:54+00:002011-10-13 19:58:54updated68higginbpBrian Higgins2011-10-13 19:56:44+00:002011-10-13 19:56:44updated67higginbpBrian Higgins2011-10-13 19:54:51+00:002011-10-13 19:54:51updated66higginbpBrian Higgins2011-10-13 19:54:42+00:002011-10-13 19:54:42updated65higginbpBrian Higgins2011-10-13 19:54:08+00:002011-10-13 19:54:08updated64higginbpBrian Higgins2011-10-13 19:25:26+00:002011-10-13 19:25:26updated63higginbpBrian Higgins2011-10-13 19:25:04+00:002011-10-13 19:25:04updated62higginbpBrian Higgins2011-10-13 19:24:29+00:002011-10-13 19:24:29updated61higginbpBrian Higgins2011-10-13 19:24:08+00:002011-10-13 19:24:08updated60hardmawwWesley Hardman2011-10-13 19:21:12+00:002011-10-13 19:21:12updated59higginbpBrian Higgins2011-10-13 18:52:06+00:002011-10-13 18:52:06updated58higginbpBrian Higgins2011-10-13 18:51:55+00:002011-10-13 18:51:55updated57higginbpBrian Higgins2011-10-13 18:50:40+00:002011-10-13 18:50:40updated56higginbpBrian Higgins2011-10-13 18:37:14+00:002011-10-13 18:37:14updated55higginbpBrian Higgins2011-10-13 18:31:58+00:002011-10-13 18:31:58updated54higginbpBrian Higgins2011-10-13 18:31:18+00:002011-10-13 18:31:18updated53higginbpBrian Higgins2011-10-13 18:26:19+00:002011-10-13 18:26:19updated52higginbpBrian Higgins2011-10-13 18:24:58+00:002011-10-13 18:24:58updated51Added tag - photo labhigginbpBrian Higgins2011-10-13 18:24:55+00:002011-10-13 18:24:55addTag50Added tag - cgchigginbpBrian Higgins2011-10-13 18:24:52+00:002011-10-13 18:24:52addTag49Added tag - rpchigginbpBrian Higgins2011-10-13 18:24:50+00:002011-10-13 18:24:50addTag48Added tag - generalhigginbpBrian Higgins2011-10-13 18:24:46+00:002011-10-13 18:24:46addTag47Added tag - informationhigginbpBrian Higgins2011-10-13 18:24:44+00:002011-10-13 18:24:44addTag46Added tag - hothigginbpBrian Higgins2011-10-13 18:24:34+00:002011-10-13 18:24:34addTag45higginbpBrian Higgins2011-10-13 18:21:37+00:002011-10-13 18:21:37updated44higginbpBrian Higgins2011-10-13 18:21:06+00:002011-10-13 18:21:06updated43higginbpBrian Higgins2011-10-13 18:20:55+00:002011-10-13 18:20:55updated42higginbpBrian Higgins2011-10-13 18:19:45+00:002011-10-13 18:19:45updated41higginbpBrian Higgins2011-10-13 18:19:20+00:002011-10-13 18:19:20updated40higginbpBrian Higgins2011-10-13 18:14:43+00:002011-10-13 18:14:43updated39higginbpBrian Higgins2011-10-13 17:55:58+00:002011-10-13 17:55:58updated38higginbpBrian Higgins2011-10-13 17:55:41+00:002011-10-13 17:55:41updated37higginbpBrian Higgins2011-10-13 17:54:14+00:002011-10-13 17:54:14updated36higginbpBrian Higgins2011-10-13 17:54:08+00:002011-10-13 17:54:08updated35hardmawwWesley Hardman2011-10-13 17:28:06+00:002011-10-13 17:28:06updated34hardmawwWesley Hardman2011-10-13 17:26:09+00:002011-10-13 17:26:09updated33hardmawwWesley Hardman2011-10-13 17:01:02+00:002011-10-13 17:01:02updated32hardmawwWesley Hardman2011-10-13 16:56:08+00:002011-10-13 16:56:08updated31hardmawwWesley Hardman2011-10-13 16:28:21+00:002011-10-13 16:28:21updated30hardmawwWesley Hardman2011-10-13 16:27:31+00:002011-10-13 16:27:31updated29hardmawwWesley Hardman2011-10-13 16:24:40+00:002011-10-13 16:24:40updated28Restored previous version ##20110712T191015ZhardmawwWesley Hardman2011-10-13 16:21:18+00:002011-10-13 16:21:18updated27willi2enEthan Williams2011-10-13 16:17:54+00:002011-10-13 16:17:54updated26Repairing bad index entryringlebtBrian Ringley2011-07-12 19:10:15+00:002011-07-12 19:10:15updated25ringlebtBrian Ringley2011-07-08 13:27:32+00:002011-07-08 13:27:32updated24rootSystem Administrator2011-07-01 15:52:17+00:002011-07-01 15:52:17updated23rootSystem Administrator2011-07-01 15:28:40+00:002011-07-01 15:28:40updated22rootSystem Administrator2011-07-01 15:28:04+00:002011-07-01 15:28:04updated21rootSystem Administrator2011-07-01 14:27:56+00:002011-07-01 14:27:56updated20rootSystem Administrator2011-07-01 14:26:25+00:002011-07-01 14:26:25updated19rootSystem Administrator2011-07-01 14:25:17+00:002011-07-01 14:25:17updated18rootSystem Administrator2011-07-01 14:23:54+00:002011-07-01 14:23:54updated17rootSystem Administrator2011-07-01 14:20:22+00:002011-07-01 14:20:22updated16rootSystem Administrator2011-07-01 14:19:40+00:002011-07-01 14:19:40updated15rootSystem Administrator2011-07-01 14:18:39+00:002011-07-01 14:18:39updated14rootSystem Administrator2011-07-01 14:18:13+00:002011-07-01 14:18:13updated13rootSystem Administrator2011-07-01 14:17:52+00:002011-07-01 14:17:52updated12ringlebtBrian Ringley2011-06-28 21:02:48+00:002011-06-28 21:02:48updated11ringlebtBrian Ringley2011-06-28 21:01:45+00:002011-06-28 21:01:45updated10lincoldsD. Scott Lincoln2011-06-28 20:58:12+00:002011-06-28 20:58:12updated9ringlebtBrian Ringley2011-06-28 20:58:07+00:002011-06-28 20:58:07updated8lincoldsD. Scott Lincoln2011-06-28 20:55:54+00:002011-06-28 20:55:54updated7ringlebtBrian Ringley2011-06-28 20:53:57+00:002011-06-28 20:53:57updated6lincoldsD. Scott Lincoln2011-06-28 20:52:46+00:002011-06-28 20:52:46updated5ringlebtBrian Ringley2011-06-28 20:51:43+00:002011-06-28 20:51:43updated4ringlebtBrian Ringley2009-09-28 19:37:19+00:002009-09-28 19:37:19updated3akinspePete Akins2009-07-14 19:03:35+00:002009-07-14 19:03:35updated2First createdakinspePete Akins2009-07-14 17:12:59+00:002009-07-14 17:12:59created1wiki2016-08-18T14:47:54+00:00groups/infocenter/wiki/welcomeFalseDAAP Info Center/groups/infocenter/wiki/welcome/DAAP_Info_Center.htmlColin Klimesh (klimescj)78 updatesDAAP Info Center [DAAP_37-2.jpg] If you are new to UC or DAAP, or just haven't been to the CGC in a while, you might not know about all the services DAAP has to offer...Falseklimescj2016-08-18T14:47:54+00:00whitsoeaElizabeth Whitson2015-08-26 18:14:35+00:002015-08-26 18:14:35updated9Added tag - 2015whitsoeaElizabeth Whitson2015-08-26 18:14:32+00:002015-08-26 18:14:32addTag8whitsoeaElizabeth Whitson2015-08-26 18:14:10+00:002015-08-26 18:14:10updated7whitsoeaElizabeth Whitson2014-11-21 18:46:16+00:002014-11-21 18:46:16updated6Added tag - hotwhitsoeaElizabeth Whitson2014-11-21 18:46:09+00:002014-11-21 18:46:09addTag5Added tag - personal drivewhitsoeaElizabeth Whitson2014-11-21 18:45:07+00:002014-11-21 18:45:07addTag4Added tag - h drivewhitsoeaElizabeth Whitson2014-11-21 18:45:03+00:002014-11-21 18:45:03addTag3Added tag - ucfilespacewhitsoeaElizabeth Whitson2014-11-21 18:44:55+00:002014-11-21 18:44:55addTag2First createdwhitsoeaElizabeth Whitson2014-11-21 18:42:25+00:002014-11-21 18:42:25created1wiki2015-08-26T18:14:35+00:00groups/infocenter/wiki/03344FalseMapping (H:) Drive - UCFileSpace /groups/infocenter/wiki/03344/Mapping_H_Drive__UCFileSpace_.htmlElizabeth Whitson9 updatesMapping (H:) Drive - UCFileSpace Follow the link below to learn how to map the (H:) drive to your machine. UCit Instructions for Mapping Drive Falsewhitsoea2015-08-26T18:14:35+00:00germannmNicholas Germann2013-11-14 16:09:12+00:002013-11-14 16:09:12updated118germannmNicholas Germann2013-07-02 19:26:30+00:002013-07-02 19:26:30updated117germannmNicholas Germann2013-07-02 19:02:36+00:002013-07-02 19:02:36updated116germannmNicholas Germann2013-07-02 18:57:38+00:002013-07-02 18:57:38updated115germannmNicholas Germann2013-07-02 18:51:29+00:002013-07-02 18:51:29updated114germannmNicholas Germann2013-07-01 19:17:11+00:002013-07-01 19:17:11updated113germannmNicholas Germann2013-07-01 15:57:50+00:002013-07-01 15:57:50updated112germannmNicholas Germann2013-07-01 14:57:00+00:002013-07-01 14:57:00updated111germannmNicholas Germann2013-07-01 14:52:02+00:002013-07-01 14:52:02updated110germannmNicholas Germann2013-06-28 21:37:27+00:002013-06-28 21:37:27updated109germannmNicholas Germann2013-06-27 18:55:27+00:002013-06-27 18:55:27updated108germannmNicholas Germann2013-06-27 15:04:37+00:002013-06-27 15:04:37updated107germannmNicholas Germann2013-06-27 14:19:12+00:002013-06-27 14:19:12updated106germannmNicholas Germann2013-06-27 13:39:21+00:002013-06-27 13:39:21updated105germannmNicholas Germann2013-06-26 15:21:44+00:002013-06-26 15:21:44updated104germannmNicholas Germann2013-06-26 15:19:11+00:002013-06-26 15:19:11updated103germannmNicholas Germann2013-06-26 14:45:10+00:002013-06-26 14:45:10updated102germannmNicholas Germann2013-06-26 14:44:14+00:002013-06-26 14:44:14updated101germannmNicholas Germann2013-06-26 14:42:11+00:002013-06-26 14:42:11updated100germannmNicholas Germann2013-06-26 14:27:39+00:002013-06-26 14:27:39updated99germannmNicholas Germann2013-06-26 14:27:08+00:002013-06-26 14:27:08updated98germannmNicholas Germann2013-06-26 14:25:52+00:002013-06-26 14:25:52updated97germannmNicholas Germann2013-06-26 14:14:29+00:002013-06-26 14:14:29updated96germannmNicholas Germann2013-06-24 17:18:28+00:002013-06-24 17:18:28updated95germannmNicholas Germann2013-06-24 17:15:45+00:002013-06-24 17:15:45updated94germannmNicholas Germann2013-06-24 16:56:18+00:002013-06-24 16:56:18updated93germannmNicholas Germann2013-06-24 16:52:09+00:002013-06-24 16:52:09updated92germannmNicholas Germann2013-02-12 23:40:38+00:002013-02-12 23:40:38updated91germannmNicholas Germann2013-02-12 15:54:22+00:002013-02-12 15:54:22updated90germannmNicholas Germann2013-02-12 15:47:17+00:002013-02-12 15:47:17updated89germannmNicholas Germann2013-02-12 15:40:43+00:002013-02-12 15:40:43updated88germannmNicholas Germann2013-02-12 15:39:29+00:002013-02-12 15:39:29updated87germannmNicholas Germann2013-01-16 18:38:42+00:002013-01-16 18:38:42updated86germannmNicholas Germann2013-01-09 16:01:21+00:002013-01-09 16:01:21updated85germannmNicholas Germann2013-01-08 19:56:52+00:002013-01-08 19:56:52updated84germannmNicholas Germann2013-01-08 19:48:44+00:002013-01-08 19:48:44updated83germannmNicholas Germann2013-01-08 19:30:28+00:002013-01-08 19:30:28updated82germannmNicholas Germann2013-01-08 18:56:53+00:002013-01-08 18:56:53updated81germannmNicholas Germann2012-07-13 13:59:35+00:002012-07-13 13:59:35updated80germannmNicholas Germann2012-07-11 21:17:59+00:002012-07-11 21:17:59updated79germannmNicholas Germann2012-07-11 20:51:32+00:002012-07-11 20:51:32updated78germannmNicholas Germann2012-07-10 18:45:21+00:002012-07-10 18:45:21updated77germannmNicholas Germann2012-07-10 18:25:44+00:002012-07-10 18:25:44updated76germannmNicholas Germann2012-07-10 16:13:34+00:002012-07-10 16:13:34updated75germannmNicholas Germann2012-07-09 21:41:42+00:002012-07-09 21:41:42updated74germannmNicholas Germann2012-07-09 21:34:18+00:002012-07-09 21:34:18updated73germannmNicholas Germann2012-07-09 21:20:29+00:002012-07-09 21:20:29updated72germannmNicholas Germann2012-07-09 21:01:01+00:002012-07-09 21:01:01updated71germannmNicholas Germann2012-07-09 20:52:33+00:002012-07-09 20:52:33updated70germannmNicholas Germann2012-07-09 20:48:44+00:002012-07-09 20:48:44updated69germannmNicholas Germann2012-07-09 20:48:09+00:002012-07-09 20:48:09updated68germannmNicholas Germann2012-07-09 20:47:54+00:002012-07-09 20:47:54updated67germannmNicholas Germann2012-07-09 20:47:35+00:002012-07-09 20:47:35updated66germannmNicholas Germann2012-07-09 20:01:05+00:002012-07-09 20:01:05updated65germannmNicholas Germann2012-07-09 19:59:50+00:002012-07-09 19:59:50updated64germannmNicholas Germann2012-07-09 19:57:37+00:002012-07-09 19:57:37updated63germannmNicholas Germann2012-07-09 19:50:06+00:002012-07-09 19:50:06updated62germannmNicholas Germann2012-07-09 19:47:38+00:002012-07-09 19:47:38updated61germannmNicholas Germann2012-07-09 19:18:43+00:002012-07-09 19:18:43updated60germannmNicholas Germann2012-07-09 15:35:47+00:002012-07-09 15:35:47updated59germannmNicholas Germann2012-07-09 15:24:35+00:002012-07-09 15:24:35updated58germannmNicholas Germann2012-07-09 15:23:32+00:002012-07-09 15:23:32updated57germannmNicholas Germann2012-07-03 17:40:47+00:002012-07-03 17:40:47updated56germannmNicholas Germann2012-07-03 17:38:08+00:002012-07-03 17:38:08updated55germannmNicholas Germann2012-07-03 16:43:50+00:002012-07-03 16:43:50updated54germannmNicholas Germann2012-07-03 16:43:08+00:002012-07-03 16:43:08updated53germannmNicholas Germann2012-07-03 15:25:28+00:002012-07-03 15:25:28updated52germannmNicholas Germann2012-07-03 14:40:56+00:002012-07-03 14:40:56updated51germannmNicholas Germann2012-06-29 17:50:00+00:002012-06-29 17:50:00updated50germannmNicholas Germann2012-06-29 16:54:52+00:002012-06-29 16:54:52updated49germannmNicholas Germann2012-06-29 16:46:15+00:002012-06-29 16:46:15updated48germannmNicholas Germann2012-06-29 16:41:34+00:002012-06-29 16:41:34updated47germannmNicholas Germann2012-06-29 16:36:48+00:002012-06-29 16:36:48updated46germannmNicholas Germann2012-06-29 16:29:47+00:002012-06-29 16:29:47updated45germannmNicholas Germann2012-06-29 16:27:02+00:002012-06-29 16:27:02updated44germannmNicholas Germann2012-06-29 16:23:37+00:002012-06-29 16:23:37updated43germannmNicholas Germann2012-06-29 16:19:33+00:002012-06-29 16:19:33updated42germannmNicholas Germann2012-06-29 16:13:13+00:002012-06-29 16:13:13updated41germannmNicholas Germann2012-06-29 15:03:18+00:002012-06-29 15:03:18updated40germannmNicholas Germann2012-06-26 16:06:11+00:002012-06-26 16:06:11updated39germannmNicholas Germann2012-06-26 15:07:00+00:002012-06-26 15:07:00updated38germannmNicholas Germann2012-06-26 15:02:50+00:002012-06-26 15:02:50updated37germannmNicholas Germann2012-06-25 22:14:54+00:002012-06-25 22:14:54updated36germannmNicholas Germann2012-06-25 21:06:38+00:002012-06-25 21:06:38updated35germannmNicholas Germann2012-06-22 21:38:30+00:002012-06-22 21:38:30updated34germannmNicholas Germann2012-06-22 20:27:56+00:002012-06-22 20:27:56updated33germannmNicholas Germann2012-06-22 20:24:52+00:002012-06-22 20:24:52updated32germannmNicholas Germann2012-06-22 19:36:27+00:002012-06-22 19:36:27updated31germannmNicholas Germann2012-06-22 18:59:27+00:002012-06-22 18:59:27updated30germannmNicholas Germann2012-06-22 18:58:16+00:002012-06-22 18:58:16updated29germannmNicholas Germann2012-06-22 18:57:03+00:002012-06-22 18:57:03updated28germannmNicholas Germann2012-06-22 18:55:37+00:002012-06-22 18:55:37updated27germannmNicholas Germann2012-06-22 18:55:08+00:002012-06-22 18:55:08updated26germannmNicholas Germann2012-06-22 18:15:56+00:002012-06-22 18:15:56updated25germannmNicholas Germann2012-06-22 18:15:44+00:002012-06-22 18:15:44updated24germannmNicholas Germann2012-06-22 18:13:41+00:002012-06-22 18:13:41updated23germannmNicholas Germann2012-06-22 17:45:02+00:002012-06-22 17:45:02updated22germannmNicholas Germann2012-06-22 17:20:45+00:002012-06-22 17:20:45updated21germannmNicholas Germann2012-06-22 17:02:13+00:002012-06-22 17:02:13updated20germannmNicholas Germann2012-06-22 16:30:25+00:002012-06-22 16:30:25updated19germannmNicholas Germann2012-06-22 16:28:52+00:002012-06-22 16:28:52updated18germannmNicholas Germann2012-06-22 15:37:25+00:002012-06-22 15:37:25updated17germannmNicholas Germann2012-06-21 21:21:43+00:002012-06-21 21:21:43updated16germannmNicholas Germann2012-06-21 21:16:28+00:002012-06-21 21:16:28updated15germannmNicholas Germann2012-06-21 21:01:27+00:002012-06-21 21:01:27updated14germannmNicholas Germann2012-06-21 20:28:26+00:002012-06-21 20:28:26updated13germannmNicholas Germann2012-06-21 19:45:54+00:002012-06-21 19:45:54updated12germannmNicholas Germann2012-06-21 19:04:41+00:002012-06-21 19:04:41updated11germannmNicholas Germann2012-06-20 17:37:46+00:002012-06-20 17:37:46updated10germannmNicholas Germann2012-06-20 16:58:54+00:002012-06-20 16:58:54updated9germannmNicholas Germann2012-06-20 16:57:14+00:002012-06-20 16:57:14updated8germannmNicholas Germann2012-06-20 16:54:42+00:002012-06-20 16:54:42updated7germannmNicholas Germann2012-06-20 16:54:12+00:002012-06-20 16:54:12updated6germannmNicholas Germann2012-06-20 16:53:24+00:002012-06-20 16:53:24updated5germannmNicholas Germann2012-06-20 16:53:12+00:002012-06-20 16:53:12updated4germannmNicholas Germann2012-06-20 16:52:39+00:002012-06-20 16:52:39updated3Added tag - hotgermannmNicholas Germann2012-06-20 16:50:31+00:002012-06-20 16:50:31addTag2First createdgermannmNicholas Germann2012-06-20 16:50:11+00:002012-06-20 16:50:11created1wiki2013-11-14T16:09:12+00:00groups/infocenter/wiki/f8f44FalseFlat Stock Material Tutorials/groups/infocenter/wiki/f8f44/Flat_Stock_Material_Tutorials.htmlNicholas Germann118 updatesFlat Stock Material Tutorials Back to Komo VR 510 Router [2half_axis_programming.jpg] [3_axis_programming.jpg] General Information To Consider Materi...Falsegermannm2013-11-14T16:09:12+00:00germannmNicholas Germann2013-11-14 16:09:12+00:002013-11-14 16:09:12updated118germannmNicholas Germann2013-07-02 19:26:30+00:002013-07-02 19:26:30updated117germannmNicholas Germann2013-07-02 19:02:36+00:002013-07-02 19:02:36updated116germannmNicholas Germann2013-07-02 18:57:38+00:002013-07-02 18:57:38updated115germannmNicholas Germann2013-07-02 18:51:29+00:002013-07-02 18:51:29updated114germannmNicholas Germann2013-07-01 19:17:11+00:002013-07-01 19:17:11updated113germannmNicholas Germann2013-07-01 15:57:50+00:002013-07-01 15:57:50updated112germannmNicholas Germann2013-07-01 14:57:00+00:002013-07-01 14:57:00updated111germannmNicholas Germann2013-07-01 14:52:02+00:002013-07-01 14:52:02updated110germannmNicholas Germann2013-06-28 21:37:27+00:002013-06-28 21:37:27updated109germannmNicholas Germann2013-06-27 18:55:27+00:002013-06-27 18:55:27updated108germannmNicholas Germann2013-06-27 15:04:37+00:002013-06-27 15:04:37updated107germannmNicholas Germann2013-06-27 14:19:12+00:002013-06-27 14:19:12updated106germannmNicholas Germann2013-06-27 13:39:21+00:002013-06-27 13:39:21updated105germannmNicholas Germann2013-06-26 15:21:44+00:002013-06-26 15:21:44updated104germannmNicholas Germann2013-06-26 15:19:11+00:002013-06-26 15:19:11updated103germannmNicholas Germann2013-06-26 14:45:10+00:002013-06-26 14:45:10updated102germannmNicholas Germann2013-06-26 14:44:14+00:002013-06-26 14:44:14updated101germannmNicholas Germann2013-06-26 14:42:11+00:002013-06-26 14:42:11updated100germannmNicholas Germann2013-06-26 14:27:39+00:002013-06-26 14:27:39updated99germannmNicholas Germann2013-06-26 14:27:08+00:002013-06-26 14:27:08updated98germannmNicholas Germann2013-06-26 14:25:52+00:002013-06-26 14:25:52updated97germannmNicholas Germann2013-06-26 14:14:29+00:002013-06-26 14:14:29updated96germannmNicholas Germann2013-06-24 17:18:28+00:002013-06-24 17:18:28updated95germannmNicholas Germann2013-06-24 17:15:45+00:002013-06-24 17:15:45updated94germannmNicholas Germann2013-06-24 16:56:18+00:002013-06-24 16:56:18updated93germannmNicholas Germann2013-06-24 16:52:09+00:002013-06-24 16:52:09updated92germannmNicholas Germann2013-02-12 23:40:38+00:002013-02-12 23:40:38updated91germannmNicholas Germann2013-02-12 15:54:22+00:002013-02-12 15:54:22updated90germannmNicholas Germann2013-02-12 15:47:17+00:002013-02-12 15:47:17updated89germannmNicholas Germann2013-02-12 15:40:43+00:002013-02-12 15:40:43updated88germannmNicholas Germann2013-02-12 15:39:29+00:002013-02-12 15:39:29updated87germannmNicholas Germann2013-01-16 18:38:42+00:002013-01-16 18:38:42updated86germannmNicholas Germann2013-01-09 16:01:21+00:002013-01-09 16:01:21updated85germannmNicholas Germann2013-01-08 19:56:52+00:002013-01-08 19:56:52updated84germannmNicholas Germann2013-01-08 19:48:44+00:002013-01-08 19:48:44updated83germannmNicholas Germann2013-01-08 19:30:28+00:002013-01-08 19:30:28updated82germannmNicholas Germann2013-01-08 18:56:53+00:002013-01-08 18:56:53updated81germannmNicholas Germann2012-07-13 13:59:35+00:002012-07-13 13:59:35updated80germannmNicholas Germann2012-07-11 21:17:59+00:002012-07-11 21:17:59updated79germannmNicholas Germann2012-07-11 20:51:32+00:002012-07-11 20:51:32updated78germannmNicholas Germann2012-07-10 18:45:21+00:002012-07-10 18:45:21updated77germannmNicholas Germann2012-07-10 18:25:44+00:002012-07-10 18:25:44updated76germannmNicholas Germann2012-07-10 16:13:34+00:002012-07-10 16:13:34updated75germannmNicholas Germann2012-07-09 21:41:42+00:002012-07-09 21:41:42updated74germannmNicholas Germann2012-07-09 21:34:18+00:002012-07-09 21:34:18updated73germannmNicholas Germann2012-07-09 21:20:29+00:002012-07-09 21:20:29updated72germannmNicholas Germann2012-07-09 21:01:01+00:002012-07-09 21:01:01updated71germannmNicholas Germann2012-07-09 20:52:33+00:002012-07-09 20:52:33updated70germannmNicholas Germann2012-07-09 20:48:44+00:002012-07-09 20:48:44updated69germannmNicholas Germann2012-07-09 20:48:09+00:002012-07-09 20:48:09updated68germannmNicholas Germann2012-07-09 20:47:54+00:002012-07-09 20:47:54updated67germannmNicholas Germann2012-07-09 20:47:35+00:002012-07-09 20:47:35updated66germannmNicholas Germann2012-07-09 20:01:05+00:002012-07-09 20:01:05updated65germannmNicholas Germann2012-07-09 19:59:50+00:002012-07-09 19:59:50updated64germannmNicholas Germann2012-07-09 19:57:37+00:002012-07-09 19:57:37updated63germannmNicholas Germann2012-07-09 19:50:06+00:002012-07-09 19:50:06updated62germannmNicholas Germann2012-07-09 19:47:38+00:002012-07-09 19:47:38updated61germannmNicholas Germann2012-07-09 19:18:43+00:002012-07-09 19:18:43updated60germannmNicholas Germann2012-07-09 15:35:47+00:002012-07-09 15:35:47updated59germannmNicholas Germann2012-07-09 15:24:35+00:002012-07-09 15:24:35updated58germannmNicholas Germann2012-07-09 15:23:32+00:002012-07-09 15:23:32updated57germannmNicholas Germann2012-07-03 17:40:47+00:002012-07-03 17:40:47updated56germannmNicholas Germann2012-07-03 17:38:08+00:002012-07-03 17:38:08updated55germannmNicholas Germann2012-07-03 16:43:50+00:002012-07-03 16:43:50updated54germannmNicholas Germann2012-07-03 16:43:08+00:002012-07-03 16:43:08updated53germannmNicholas Germann2012-07-03 15:25:28+00:002012-07-03 15:25:28updated52germannmNicholas Germann2012-07-03 14:40:56+00:002012-07-03 14:40:56updated51germannmNicholas Germann2012-06-29 17:50:00+00:002012-06-29 17:50:00updated50germannmNicholas Germann2012-06-29 16:54:52+00:002012-06-29 16:54:52updated49germannmNicholas Germann2012-06-29 16:46:15+00:002012-06-29 16:46:15updated48germannmNicholas Germann2012-06-29 16:41:34+00:002012-06-29 16:41:34updated47germannmNicholas Germann2012-06-29 16:36:48+00:002012-06-29 16:36:48updated46germannmNicholas Germann2012-06-29 16:29:47+00:002012-06-29 16:29:47updated45germannmNicholas Germann2012-06-29 16:27:02+00:002012-06-29 16:27:02updated44germannmNicholas Germann2012-06-29 16:23:37+00:002012-06-29 16:23:37updated43germannmNicholas Germann2012-06-29 16:19:33+00:002012-06-29 16:19:33updated42germannmNicholas Germann2012-06-29 16:13:13+00:002012-06-29 16:13:13updated41germannmNicholas Germann2012-06-29 15:03:18+00:002012-06-29 15:03:18updated40germannmNicholas Germann2012-06-26 16:06:11+00:002012-06-26 16:06:11updated39germannmNicholas Germann2012-06-26 15:07:00+00:002012-06-26 15:07:00updated38germannmNicholas Germann2012-06-26 15:02:50+00:002012-06-26 15:02:50updated37germannmNicholas Germann2012-06-25 22:14:54+00:002012-06-25 22:14:54updated36germannmNicholas Germann2012-06-25 21:06:38+00:002012-06-25 21:06:38updated35germannmNicholas Germann2012-06-22 21:38:30+00:002012-06-22 21:38:30updated34germannmNicholas Germann2012-06-22 20:27:56+00:002012-06-22 20:27:56updated33germannmNicholas Germann2012-06-22 20:24:52+00:002012-06-22 20:24:52updated32germannmNicholas Germann2012-06-22 19:36:27+00:002012-06-22 19:36:27updated31germannmNicholas Germann2012-06-22 18:59:27+00:002012-06-22 18:59:27updated30germannmNicholas Germann2012-06-22 18:58:16+00:002012-06-22 18:58:16updated29germannmNicholas Germann2012-06-22 18:57:03+00:002012-06-22 18:57:03updated28germannmNicholas Germann2012-06-22 18:55:37+00:002012-06-22 18:55:37updated27germannmNicholas Germann2012-06-22 18:55:08+00:002012-06-22 18:55:08updated26germannmNicholas Germann2012-06-22 18:15:56+00:002012-06-22 18:15:56updated25germannmNicholas Germann2012-06-22 18:15:44+00:002012-06-22 18:15:44updated24germannmNicholas Germann2012-06-22 18:13:41+00:002012-06-22 18:13:41updated23germannmNicholas Germann2012-06-22 17:45:02+00:002012-06-22 17:45:02updated22germannmNicholas Germann2012-06-22 17:20:45+00:002012-06-22 17:20:45updated21germannmNicholas Germann2012-06-22 17:02:13+00:002012-06-22 17:02:13updated20germannmNicholas Germann2012-06-22 16:30:25+00:002012-06-22 16:30:25updated19germannmNicholas Germann2012-06-22 16:28:52+00:002012-06-22 16:28:52updated18germannmNicholas Germann2012-06-22 15:37:25+00:002012-06-22 15:37:25updated17germannmNicholas Germann2012-06-21 21:21:43+00:002012-06-21 21:21:43updated16germannmNicholas Germann2012-06-21 21:16:28+00:002012-06-21 21:16:28updated15germannmNicholas Germann2012-06-21 21:01:27+00:002012-06-21 21:01:27updated14germannmNicholas Germann2012-06-21 20:28:26+00:002012-06-21 20:28:26updated13germannmNicholas Germann2012-06-21 19:45:54+00:002012-06-21 19:45:54updated12germannmNicholas Germann2012-06-21 19:04:41+00:002012-06-21 19:04:41updated11germannmNicholas Germann2012-06-20 17:37:46+00:002012-06-20 17:37:46updated10germannmNicholas Germann2012-06-20 16:58:54+00:002012-06-20 16:58:54updated9germannmNicholas Germann2012-06-20 16:57:14+00:002012-06-20 16:57:14updated8germannmNicholas Germann2012-06-20 16:54:42+00:002012-06-20 16:54:42updated7germannmNicholas Germann2012-06-20 16:54:12+00:002012-06-20 16:54:12updated6germannmNicholas Germann2012-06-20 16:53:24+00:002012-06-20 16:53:24updated5germannmNicholas Germann2012-06-20 16:53:12+00:002012-06-20 16:53:12updated4germannmNicholas Germann2012-06-20 16:52:39+00:002012-06-20 16:52:39updated3Added tag - hotgermannmNicholas Germann2012-06-20 16:50:31+00:002012-06-20 16:50:31addTag2First createdgermannmNicholas Germann2012-06-20 16:50:11+00:002012-06-20 16:50:11created1wiki2013-11-14T16:09:12+00:00groups/infocenter/wiki/f8f44FalseFlat Stock Material Tutorials/groups/infocenter/wiki/f8f44/Flat_Stock_Material_Tutorials.htmlNicholas Germann118 updatesFlat Stock Material Tutorials Back to Komo VR 510 Router [2half_axis_programming.jpg] [3_axis_programming.jpg] General Information To Consider Materi...Falsegermannm2013-11-14T16:09:12+00:00higginbpBrian Higgins2013-08-09 18:31:40+00:002013-08-09 18:31:40updated49higginbpBrian Higgins2013-08-09 18:31:36+00:002013-08-09 18:31:36updated48whitsoeaElizabeth Whitson2013-05-07 18:56:34+00:002013-05-07 18:56:34updated47willi2enEthan Williams2012-02-14 14:32:18+00:002012-02-14 14:32:18updated46willi2enEthan Williams2012-02-14 14:31:05+00:002012-02-14 14:31:05updated45okorosmmMichelle Okoroski2012-02-10 15:39:17+00:002012-02-10 15:39:17updated44higginbpBrian Higgins2012-01-10 19:03:20+00:002012-01-10 19:03:20updated43higginbpBrian Higgins2012-01-10 19:03:11+00:002012-01-10 19:03:11updated42higginbpBrian Higgins2012-01-10 19:02:56+00:002012-01-10 19:02:56updated41higginbpBrian Higgins2012-01-10 19:02:31+00:002012-01-10 19:02:31updated40higginbpBrian Higgins2012-01-10 19:02:22+00:002012-01-10 19:02:22updated39higginbpBrian Higgins2012-01-10 19:02:13+00:002012-01-10 19:02:13updated38higginbpBrian Higgins2012-01-10 19:01:36+00:002012-01-10 19:01:36updated37higginbpBrian Higgins2012-01-10 19:01:01+00:002012-01-10 19:01:01updated36higginbpBrian Higgins2012-01-10 19:00:52+00:002012-01-10 19:00:52updated35higginbpBrian Higgins2012-01-10 18:59:30+00:002012-01-10 18:59:30updated34higginbpBrian Higgins2012-01-10 18:52:42+00:002012-01-10 18:52:42updated33higginbpBrian Higgins2012-01-10 18:52:04+00:002012-01-10 18:52:04updated32higginbpBrian Higgins2012-01-10 18:51:48+00:002012-01-10 18:51:48updated31higginbpBrian Higgins2012-01-10 18:51:23+00:002012-01-10 18:51:23updated30higginbpBrian Higgins2011-10-13 22:13:46+00:002011-10-13 22:13:46updated29higginbpBrian Higgins2011-10-13 22:11:02+00:002011-10-13 22:11:02updated28higginbpBrian Higgins2011-10-13 21:59:56+00:002011-10-13 21:59:56updated27higginbpBrian Higgins2011-10-13 21:59:05+00:002011-10-13 21:59:05updated26higginbpBrian Higgins2011-10-13 21:57:08+00:002011-10-13 21:57:08updated25higginbpBrian Higgins2011-10-13 21:54:33+00:002011-10-13 21:54:33updated24higginbpBrian Higgins2011-10-13 21:54:10+00:002011-10-13 21:54:10updated23higginbpBrian Higgins2011-10-13 20:36:03+00:002011-10-13 20:36:03updated22higginbpBrian Higgins2011-10-13 19:58:07+00:002011-10-13 19:58:07updated21Added tag - hothigginbpBrian Higgins2011-10-13 19:58:06+00:002011-10-13 19:58:06addTag20Added tag - tutorialshigginbpBrian Higgins2011-10-13 19:58:03+00:002011-10-13 19:58:03addTag19Added tag - tutorialhigginbpBrian Higgins2011-10-13 19:57:54+00:002011-10-13 19:57:54addTag18Added tag - cgc informationhigginbpBrian Higgins2011-10-13 19:57:49+00:002011-10-13 19:57:49addTag17Added tag - cgchigginbpBrian Higgins2011-10-13 19:57:44+00:002011-10-13 19:57:44addTag16higginbpBrian Higgins2011-10-13 19:57:39+00:002011-10-13 19:57:39updated15higginbpBrian Higgins2011-10-13 19:51:33+00:002011-10-13 19:51:33updated14higginbpBrian Higgins2011-10-13 19:50:55+00:002011-10-13 19:50:55updated13higginbpBrian Higgins2011-10-13 19:39:03+00:002011-10-13 19:39:03updated12higginbpBrian Higgins2011-10-13 19:30:16+00:002011-10-13 19:30:16updated11higginbpBrian Higgins2011-10-13 19:29:42+00:002011-10-13 19:29:42updated10higginbpBrian Higgins2011-10-13 19:28:18+00:002011-10-13 19:28:18updated9higginbpBrian Higgins2011-10-13 19:27:11+00:002011-10-13 19:27:11updated8higginbpBrian Higgins2011-10-13 18:23:12+00:002011-10-13 18:23:12updated7higginbpBrian Higgins2011-10-13 18:19:57+00:002011-10-13 18:19:57updated6higginbpBrian Higgins2011-10-13 18:16:27+00:002011-10-13 18:16:27updated5higginbpBrian Higgins2011-10-13 18:04:52+00:002011-10-13 18:04:52updated4Repairing bad index entryrootSystem Administrator2011-07-13 14:49:42+00:002011-07-13 14:49:42updated3rootSystem Administrator2011-07-01 14:22:42+00:002011-07-01 14:22:42updated2First createdrootSystem Administrator2011-07-01 14:22:33+00:002011-07-01 14:22:33created1wiki2013-08-09T18:31:40+00:00groups/infocenter/wiki/85f12FalseDAAP CGC/groups/infocenter/wiki/85f12/DAAP_CGC.htmlBrian Higgins49 updatesDAAP CGC Computer Graphics Center Information [_MG_6981.jpg] On this page you will find links to various resources that the CGC provides to both st...Falsehigginbp2013-08-09T18:31:40+00:00hot/groups/infocenter/search/index.rss?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcomelist/groups/infocenter/search/?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcomeRecent ChangesRecentChangesListUpdates?sort=modifiedDate&kind=all&sortDirection=reverse&excludePages=wiki/welcome0/groups/infocenter/sidebar/RecentChangesListmodifiedDateallRecent ChangesRecentChangesListUpdateswiki/welcomeNo recent changes.reverse5search