Search all wikis and blogs »

Search results in DAAP Info Center

DAAP Rapid Prototyping Center (RPC)

Back to DAAPspace | Back to DAAP Wiki (Info Center) | Back to daap.uc.eduTutorials RPC Job Submission System [composite_new_1-of-2.jpg][composite_n...

uPrint ABS Extrusion Printer

Back to 3D Printing Instructions Summary General Information Similar to all additive technologies, the ABS prin...

VACU Press

Back to CNC Machining VACU Press Signup Summary The VACU Press used a 1/3 HP 6 cfm oil-less rotary vane pump to create a vacuum within...

CNC Machining

Back to Rapid Prototyping Center Home CNC machines are used to mill block and flat stock materials. The RPC runs two primary 3-axis mill...

Using Powermill

Back to CNC Machining [Powermill 2017 logo.jpg] The RPC uses Delcam PowerMill to process and program for the DAAP CNC milling machines. The tuto...

Bridgeport Programming: Sculptural Forms

Back to CNC Machining Summary This document is basic introduction to the use of CNC programming to produce foam model parts on the Bri...

Tutorials

Back to DAAP Rapid Prototyping Center (RPC) How to Get Started Your professor must create an RPC Project that is associated with your co...

3D Powder Printing

Back to 3D Printing Summary Advantages of 3D Powder Printing Objects with negative space and undercuts can be printed out. Du...

Kerf Width and Slot Fitting

Kerf Width [image] The laser cutters do not cleanly separate material; a thin line of matter is burned when cut by the laser. This ope...

Cleaning Materials

Cleaning Materials If masking was not done properly or foregone altogether, it is likely, dependent on the material, that there wi...

Material Masking

Material Masking Often acrylic is sold with a poly or paper film to protect the material from surface scratches. These films are a...

Cutting Multiples / Flip Cuts

Cutting Multiple Sheets / Flip Jobs It is possible to cut multiple sheets/pieces of material in a single job, but there are restrictions: ...

Slot Fitting

Slotting & Fit [Laser_Kerf_4.jpg] In order to slot together pieces of material without too much slop, it is important to account...

Tabbing

Tabbing The laser cutter has a honeycomb steel bed. This allows for negative pressure to help "pull" the laser through t...